Mikrotik wAP LTE kit
Specifications wAP LTE kit US
|CPU nominal frequency||650 MHz|
|CPU core count||1|
|Size of RAM||64 MB|
|10/100 Ethernet ports||1|
|Wireless||Built-in 2.4 GHz 802.11b/g/n, dual-chain|
|Wireless antenna gain||2 dBi|
|LTE antenna gain||2 - 4.5 dBi (with uFL connector)|
|Antenna beam width||360°|
|Wireless chip model||QCA9531|
|LTE category||4 (150Mbps Downlink, 50Mbps Uplink)|
|3G category||R7 (21Mbps Downlinks, 5.76Mbps Uplink)|
|Supported input voltage||9 V - 30 V (Passive PoE)|
|Dimensions||185 x 85 x 30 mm|
|Operating temperature||-40°C .. +60°C tested|
|Max Power consumption||8 W|
MikroTik RouterBOARD wAP LTE kit (US Version)
650MHz 2dBi 8W Wireless Access Point
These products will not work on Verizon’s US network outside large metro areas because they do not run Band 13. They are also not certified on Verizon so use them at your own risk. Check with your cellular provider before using on that carrier’s network.
The wAP LTE Kit-US is a small weatherproof wireless access point with a built in cellular modem that supports 3G and 4G (LTE) connectivity. Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices.
The waterproof device can be mounted outside your house, in the vehicle, on your porch or anywhere else where you need wireless access from your phone or computer. It also includes a desktop stand so you can put it inside the building near a window.
LTE cards are connected to two internal antennas with u.FL connectors, so if you want, you can unplug the connectors and add your own external LTE antenna for larger coverage. Unit has the several powering options - 9-30v PoE-in by Ethernet port, DC jack and Automotive connector, very handy in mobile devices like car, bus or train.
Three versions are available::
- RBwAPR-2nD&R11e-LTE includes LTE modem that supports International LTE bands 1,2,3,7,8,20,38 and 40.
- RBwAPR-2nD&R11e-LTE-US includes LTE modem that supports LTE bands 2,4,5 and 12, mostly used by mobile operators in United States, Canada and Latin America.
- RBwAPr-2nD is shipped with without LTE card installed (empty miniPCI slot), so you can use your own LTE card.