NOTE: This device is engineered for the European LTE market, and will NOT function in North America.
The SXT LTE (product code RBSXTLTE3-7) is a special variant of our popular SXT device, and doesn’t include a 802.11 wireless device. Instead, it has a built in high quality LTE Category 3 modem for speeds of up to 100Mbit/s downlink and 50 Mbit/s uplink.
A perfect device for remote locations that are within cellular network coverage. Due to it’s professional LTE chip and high gain antenna, it can provide connectivity for your building even where cell phones can’t.
The signal LEDs show LTE signal level for easy positioning. The SXT LTE supports the popular LTE FDD bands 3 (1800MHz) and 7 (2600MHz), has a miniSIM slot and is not backwards compatible with older networks.
|CPU nominal frequency||400 MHz|
|CPU core count||1|
|Size of RAM||64 MB|
|10/100 Ethernet ports||1|
|Wireless chip model||GDM7240CB20BGT|
|Supported input voltage||11 V - 57 V|
|PCB temperature monitor||Yes|
|Tested ambient temperature||-30 + 70 C|
|Antenna gain DBI||9|
|Max Power consumption||5W|
|Number of chains||2|
|Storage size||128 MB|
Ethernet test results
|RBSXTLTE3-7||AR7241 100M 1 port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||8.1||98.6||23.5||96.3||148.0||75.8|
|Bridging||25 bridge filter rules||8.1||98.6||23.5||96.3||53.7||27.5|
|Routing||none (fast path)||8.1||98.6||23.5||96.3||148.0||75.8|
|Routing||25 simple queues||8.1||98.6||23.5||96.3||92.8||47.5|
|Routing||25 ip filter rules||8.1||98.6||23.5||96.3||37.5||19.2|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results