Canada's largest and oldest Mikrotik distributor - providing Mikrotik solutions since 2002.

  • PoE Power Supply Inserter, Active Splitter, 9 VDC

The active POE splitter from Laird Technologies gives “carrier class”performance in a low cost system. With its IEEE 802.3af compatibility andadvanced auto-sensing algorithm it will accept POE power from any IEEE802.3af router or power supply. The overload and short circuit protection willshut down power immediately when a short circuit is detected without anydamage to the POE system.
Using power over ethernet to power remote devices has several advantagesincluding;

  • The power supply can be centrally located where it can be attached to an uninterruptible power supply.
  • Power can be supplied over long distances, up to 300 feet.
  • Power can be available wherever network access is available
  • The user has the ability to easily power on reset the attached equipment from a remote location.
      Features and Benefits:
    • IEEE 802.3af power over ethernet active splitter
    • Choice of 5, 9, 12 or 24VDC regulated power
    • 100MOhm / 1000VDC isolation
    • Advanced auto-sensing intelligent algorithm
    • Overload and short circuit protection
    • Advanced switching technology – runs cool
    • Complies with IEEE 802.3af POE standard
    • FCC and CE approved
    • Compatible with IEE 802.3af routers including Cisco and Netgear
      Applications
    • Remote routers, access points and bridges
    • Remote networking equipment
    • SOHO equipment
    • IP camera systems
    • VOIP systems
    • IP phone systems
      Specifications
    • Input Voltage: 36 to 60VDC
    • Output Voltage: POE-9s 9VDC @ 1A
    • Output Ripple: 1% Max
    • Switching Frequency: 100KHz Typ
    • Line Regulation: +/- 0.5%
    • Load Regulation: +/- 1%
    • Isolation Voltage: 1000VDC
    • Isolation Resistance: 100M Ohms (min)
    • Input Set Class Resistance: 25K Ohms
    • Operating Temperature: -10 to +60 deg C
    • Storage Temperature: -20 to +85 deg C
    • Operating Humidity: 5% to 90% non condensing
    • Size: 3.25” x 3” x 1.5” (83 x 76 x 38mm)
    • Weight: 4.6oz (130gm)
    • Data/POE IN Conn.: RJ45 Socket
    • Data OUT Conn.: 12” Cable with RJ45 Plug
    • VDC OUT Conn.: 12” Cable with 5.5 x 2.1 x 12mmAdapter Plug

Write a review

Please login or register to review

PoE Power Supply Inserter, Active Splitter, 9 VDC

  • Product Code: POE-9s-afi
  • Availability: In Stock
  • US$23.59