RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.
cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.
Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.
Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and screw anchors.
|CPU nominal frequency||650 MHz|
|CPU core count||1|
|Size of RAM||64 MB|
|10/100 Ethernet ports||1|
|Wireless chip model||QCA9533|
|Supported input voltage||11 V - 57 V|
|Dimensions||185mm diameter, 31mm heigh|
|Tested ambient temperature||-30C to +70C|
|Antenna gain DBI||2|
|Max Power consumption||4W|
|Number of chains||2|
|Transmit power (dBm)||Receive Sensitivity||Transmit power (mW)|
wireless parameters may be limited in software, depending on your local regulatory limitations
Ethernet test results
|RBcAP2nD||QCA9533 100M one port test|
|Mode||Configuration||1518 byte||512 byte||64 byte|
|Bridging||none (fast path)||8.1||98.4||23.5||96.3||173.6||88.9|
|Bridging||25 bridge filter rules||8.1||98.4||23.5||96.3||70.9||36.3|
|Routing||none (fast path)||8.1||98.4||23.5||96.3||160.8||82.3|
|Routing||25 simple queues||8.1||98.4||23.5||96.3||90.8||46.5|
|Routing||25 ip filter rules||8.1||98.4||23.5||96.3||43.2||22.1|
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results